CUSTOMIZATION

We are manufacturer .

3 to 6 working days for conventional products, and the date of customized products shall be subject to the negotiation between the parties

Is Customized products available?

Yes,please offer your required specifications and drawing

Do you Accept OEM service?

Of course,  We do accept OEM.

Your contact address and sample description can be faxed，email or other else to us. Samples will be sent out on the same day or the next day. For higher cost samples, we will charge a portion of the cost and give you timely feedback on the development cycle if production mold are needed.

Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shipment, We'll show you the photos of the products and packages before you pay the balance.

Depending on different materials and service environment, the service life of sealing strip will be correspondingly different. The service life of general PVC is 3-5 years, and that of TPE, TPV, EPDM and SIR is more than 20 years.

We need to depend on the product process structure, the regular product development cycle of 7-15 days, the specific process of 15-30 days

Have you checked and tested all the goods before delivery?

Yes, we have 100% test before delivery

We provide OEM & ODM services with innovation, profession,exquisiteness and satisfaction.

No, we use a new environmentally friendly material, which does not react with any auxiliary materials on the board

1) before installing the door and window sealing strip, clean the positions posted on the demand, carefully remove the sundries and dust with the cloth, ensure the cleanliness of the positions posted, and ensure the tightness of the doors and Windows sealing strip with the slot.

2) tear off the tape of the door and window sealing strip and post it on the position where the demand is posted.

3) when the sealing strip equipment of doors and Windows is connected to the two ends, shrink the two ends of the sealing strip to the base a little, leaving a 2-3cm shortening allowance, and then cut the sealing strip.

4) the sealing strip shall be posted well in the future, and then be pressed tightly with your hands, so that the adhesive of the sealing strip and the doors and Windows shall be glued together.

I. thoroughly clean and dry the parts that need to be installed with sound-proof sealing strip and the plane position of sealing strip;

Two, choose a good paste position, find the starting point of the paste will be from the beginning of the sealing strip, a little press and paste, pay attention to do not have a little pull the sealing strip action, try to keep the original shape of the sealing strip slowly alignment to find the correct paste path for careful paste; In the position of one knot corner, sealing strip should notice very downy undertake bending to go, do not turn too urgent and affect beautiful. In addition, there should be no dirt or other impurities on the 3M adhesive, and the picture should not be rushed when pasting. Only in this way can the effect be guaranteed. Only in this way can the effect be guaranteed.

Three, all paste in place after inspection without error, the soundproof strip to do the appropriate trimming, such as a short time after the hand for thoughtful and meticulous pressure, you can call it a day. At this time, it is better not to close the door. Leave the door open for 20 minutes and then close the door again.

Four, after the end of the paste, do not use the hand to pull the seal, do not wash the car in 3 days with water (if it rains that can not be) within 24 hours as far as possible do not repeatedly open and close the door;

Five, after the completion of the construction will close a little tight, driving, must pay attention to whether the door is closed, pay attention to the safety of driving;

Six, installation position after the closure of the sealing strip must be in the state of positive pressure, so as to make its back full role. (note -- -- positive pressure: the direction of pressure is perpendicular to the plane where the adhesive is)