Kenna rubber seal strip suppliers & specialist,focus on EPDM, PVC, TPE, TPO, NR, CR, NBR, TPR, TPV, EVA, SIR, PP, PC, PMMA and other raw materials developed products.

Tel : +86 020-020-86213703  E-mail : liuwei@kennarubber.com

Pressure cooker silicone strips

by:Kenna     2021-03-08
Where can I use pressure cooker silicone strips? Wooden windows, aluminum clad wood, aluminum alloy doors and windows, wooden doors, wood-plastic doors, ecological doors, log doors, solid wood doors, painted doors, oak doors, composite doors, suit doors, security doors, sliding doors, wardrobe doors, cabinet doors, Bronze doors, cast aluminum doors, plastic steel doors and windows, etc., 035W/m2K; 5. Fatigue resistance test: imitating window opening and closing 500,000 times, no obvious change in shape 6. Sound insulation test: only IV68 windows with intermediate strips, reducing noise 7. The IV76 window with intermediate and additional rubber strips can reduce noise by 45 decibels. 8. Outdoor aging resistance test: It has been more than 20 years and the performance is maintained intact. The series of products are environmentally friendly products and do not contain CFC harmful substances. Types and purposes of door and window sealing strips Introduction: When we install doors and windows in our lives, there will always be certain gaps, which will cause the doors and windows to close tightly. The role of door and window sealing strips is used to eliminate these gaps. However, there are many types of door and window sealing strips, and their uses are also different. I have compiled some relevant information about the types of door and window sealing strips for everyone here. Door and window sealing strips can be divided into major categories in use: glass sealing strips, door leaf and door cover sealing strips and wool strips. The glass sealing strip is used to seal the gap between the glass leaf and the frame. The door leaf sealing strip is used to seal the gap between the door panel and the door frame, and the wool strip is mainly used to seal the gap between the frame and the door. It is said that in the installation process of various doors and windows, the sealing strip is indispensable. The sealing strip plays a role of sealing and waterproofing in plastic steel doors and windows, aluminum alloy doors and windows, and wooden doors and windows. Sealing strips have very high requirements for materials. First, they must have strong stretchability and elasticity, as well as good temperature resistance and aging resistance. At the same time, in order to ensure the close contact between the sealing strip and the profile, the cross-sectional structure of the sealing strip must match the profile of the door and window, which is generally suitable for hanging windows and folding doors and windows. Doors and windows are the barriers to the quiet living environment. Doors and windows are also important and interesting bridges between people's internal world and the external world. The sealing performance of doors and windows is constantly enriched, and the opening is more and more catering to the needs of life. This significant change Implied the improvement of the quality of life, in fact, they all represent a trend of living quality. When doors and windows form concepts in the process of human civilization, doors and windows have become another carrier of human civilization, and they can be used to satisfy the use of functions. Transformed into a desire for spiritual refuge and ideal extension. The heat resistance and cold resistance, insulation and conductivity, as well as flame retardancy are very good. It can be used at 100-120℃ for a long time, and it can remain effective for a long period of time at 140-150℃. Its physical properties can withstand high temperatures of 230-260°C in a short time, and it can be used as a delay in the case of sudden accidents in urban buildings; coupled with the use of special formulas, EPDM rubber feels similar at -50°C to 150°C , This has created a high-efficiency work performance for the production site installation. The top is generally used to install on the sash of the push-type door and window to seal the gap between the frame and the sash. The specifications of the top can greatly affect the watertight performance of doors and windows, and also affect the opening and closing of doors and windows. If the size of the top is too large, or the vertical hair is too high, it will be very difficult to assemble, and after the assembly is completed, the resistance of the doors and windows will increase when they move. If the fire size is too small, or the vertical hair is too low, the door and window are prone to bracket phenomenon, which reduces the airtightness of the door and window. There are generally two types of tops that have undergone silicification treatment and those that have not been silicified. Generally, the treatment effect will be better. Quality tops have the following characteristics: there are no obvious defects in appearance, the surface is straight, the bottom plate and vertical hairs are relatively smooth, there is no bending phenomenon, and there are no pits and other problems on the bottom plate, and it meets the size requirements. According to the cross-sectional shape classification, automobile sealing strips can be divided into solid core products (round, square, flat cross-sectional shapes), hollow products and metal-rubber composite products. Second, heat aging resistance EPDM sealing strips are in production Many experiments have been carried out before. It can be seen from the experiment that the product can continue to work in a high-temperature environment without aging. Therefore, many companies use the product to improve work efficiency to obtain More profit. Talking about the important role of epdm for doors and windows. With the further development of science and technology and the continuous improvement of living standards, and the call of an energy-saving and harmonious society that has been advocated, we all know that doors and windows are the eyes of the building, and its energy loss can be It accounts for 40% of the total energy loss of buildings, which has attracted enough attention, especially in large cities like the capital Beijing. In 2004, the heat transfer coefficient of doors and windows (indices for heat preservation and energy saving) was used as a mandatory acceptance index. Provinces, cities and regions across the country have also attracted great attention and implementation, and energy-saving doors and windows have become the mainstream of building doors and windows.
custom sealing strip rubber seal strip suppliers processes have been widely used to produce custom sealing strip such as custom sealing strip, custom sealing strip, and custom sealing strip etc.
Visit Guangzhou Kenna Rubber & Plastic Co., Ltd. for the best in supplies: Kenna Rubber & Plastic.
To find a qualified at reasonable price, contact Guangzhou Kenna Rubber & Plastic Co., Ltd. at Kenna Rubber & Plastic, a professional provider and tell them what you envision for your rubber seal strip suppliers.
The more people who do a certain thing, the more likely others are to do it as well. When Kenna can demonstrate their popularity or satisfaction across a wide customer base, other consumers are more likely to buy in as well.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...