Kenna rubber seal strip suppliers & specialist,focus on EPDM, PVC, TPE, TPO, NR, CR, NBR, TPR, TPV, EVA, SIR, PP, PC, PMMA and other raw materials developed products.

Tel : +86 020-020-86213703  E-mail : liuwei@kennarubber.com

Ship anti-collision silicone strip

by:Kenna     2021-04-13
Ship anti-collision silicone strips. In addition, the material proportions (above 1, 4) of this type of products are equivalent to PVC (low-end vulcanized EPDM strips have a larger proportion). The window rate is similar to that of PVC strips, and the cost of use is relatively biased. High, difficult for door and window companies to accept. Sealing strips can be classified according to several methods such as section shape, vulcanization method, application location and purpose, and materials used. Product characteristics 1) Light bulk density, high expansion and contraction strength, and no water absorption (replacement of traditional three oil Four felt, asphalt wood fir board and other materials). Types and uses of door and window sealing strips Introduction: When we install doors and windows in our lives, there will always be a fixed gap, which leads to tightly closed doors and windows. The door and window sealing strips are used to eliminate these gaps. However, there are many types of door and window sealing strips, and their uses are also different. I have compiled some relevant information about the types of door and window sealing strips for everyone here. Door and window sealing strips can be divided into major categories in use: glass sealing strips, door leaf and door cover sealing strips and wool strips. The glass sealing strip is used to seal the gap between the glass leaf and the frame. The door leaf sealing strip is used to seal the gap between the door panel and the door frame, and the wool strip is mainly used to seal the gap between the frame and the door. It is said that in the installation process of various doors and windows, the sealing strip is indispensable. The sealing strip plays a role of sealing and waterproofing in plastic steel doors and windows, aluminum alloy doors and windows, and wooden doors and windows. Sealing strips have very high requirements for materials. First, they must have strong stretchability and elasticity, as well as good temperature resistance and aging resistance. At the same time, in order to ensure the close contact between the sealing strip and the profile, the cross-sectional structure of the sealing strip must match the profile of the door and window, which is generally suitable for hanging windows and folding doors and windows. The surface of the silicone rubber sealing strip is very flat. When observing its surface, we will find that its surface has a very uniform foaming density and also has good resilience performance. The choice of sealing material determines In order to have long-term flexibility and elasticity, through formula adjustment, the softness of the sealant after drying is improved, so that a good sealing layer is formed between the sheet metal and the rubber strip. The unique high elasticity of butyl rubber ensures the sealing The glue is easy to peel from the metal sheet without contaminating the sheet metal. Talking about the important role of epdm for doors and windows. With the further development of science and technology and the continuous improvement of living standards, and the call of an energy-saving harmonious society that has been advocated, we all know that doors and windows are the eyes of the building, and its energy loss can be It accounts for 40% of the total energy loss of buildings, which has attracted enough attention, especially in large cities like the capital Beijing. In 2004, the heat transfer coefficient of doors and windows (indices for heat preservation and energy saving) was used as a mandatory acceptance index. Provinces, cities and regions across the country have also attracted great attention and implementation, and energy-saving doors and windows have become the mainstream of building doors and windows. The top is generally used to install on the sash of the push-type door and window to seal the gap between the frame and the sash. The specifications of the tops can largely affect the watertight performance of doors and windows, as well as the opening and closing of doors and windows. If the size of the top is too large, or the vertical hair is too high, it will be very difficult to assemble, and after the assembly is completed, the resistance of the doors and windows will increase when they move. If the fire size is too small, or the vertical hair is too low, the door and window are prone to bracket phenomenon, which reduces the airtightness of the door and window. There are generally two types of tops that have undergone silicification treatment and those that have not been silicified. Generally, the treatment effect will be better. Quality tops have the following characteristics: there are no obvious defects in appearance, the surface is straight, the bottom plate and vertical hairs are relatively smooth, there is no bending phenomenon, and there are no pits and other problems on the bottom plate, and it meets the size requirements. People's perfection of doors and windows can be said to symbolize the perfection of human beings, to protect your voice and ears, to make life more comfortable, and to save energy. There is one goal: to promote the development of 'global environmental protection doors and windowsContribute to environmental protection, the air cabinet sealing strip is made of good elasticity and resistance to compression deformation, aging, ozone, and chemical effects, wide operating temperature range (-40℃~+120℃), ethylene-propylene-diene rubber ( EPDM) The composite rubber is foamed and dense, with unique metal clamps and tongue buckles, which is durable. The auxiliary seal of the compensation ring is a metal bellows called a bellows mechanical seal. 2. The composition of the mechanical seal: There are mainly the following four types of components, a, the main seal: moving ring and static ring, b, the auxiliary seal: seal Ring, c, compression parts: spring, push ring, d, three. At the same time, put the PVC sealing strip and the silicone rubber sealing strip in the freezer compartment of the refrigerator. After a few hours, the PVC sealing strip will feel very stiff and easy to break. , There is no change in the physical properties of silicone rubber sealing strips. According to the material classification, the rubber materials of automobile sealing strips are compact rubber, sponge rubber and hard rubber. The hardness of hard rubber can reach Shore A95. EPDM can be combined with steel belt, steel wire braided belt, TPE, flannel, flocking, PU coating, organic silicon coating, etc., to ensure the waterproof, dustproof, sound insulation, heat insulation, vibration reduction, wear resistance and decoration effects of the car interior and the outside world and itself, and it can also choose to have good ozone resistance and good aging resistance Performance of neoprene (CR).
Guangzhou Kenna Rubber & Plastic Co., Ltd. has famous reputation in worldwide.
Guangzhou Kenna Rubber & Plastic Co., Ltd. assures you that you will be satisfied with its results and humbly request you to try this. We are hoping for a better business deal with you.
By balancing the efficiencies of new technologies with the personal touch of highly trained and motivated professionals, Guangzhou Kenna Rubber & Plastic Co., Ltd. is able to deliver solutions and services that exceed our customers’ expectations. We thereby earn their loyalty.
The rising custom sealing strip consciousness observed worldwide are expected to be key factors driving the demand for custom sealing strip rubber seal strip suppliers.
The risk of custom sealing strip is reduced by custom sealing strip with the consumption of .
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...