Kenna rubber seal strip suppliers & specialist,focus on EPDM, PVC, TPE, TPO, NR, CR, NBR, TPR, TPV, EVA, SIR, PP, PC, PMMA and other raw materials developed products.

Tel : +86 020-020-86213703  E-mail : liuwei@kennarubber.com

Silicone strip and glass stick together

by:Kenna     2021-06-14
Silicone strips and glass are glued together. Types and uses of door and window sealing strips. Introduction: When we install doors and windows in life, there will always be certain gaps, which cause the doors and windows to close tightly. The role of door and window sealing strips is used to eliminate these gaps. However, there are many types of door and window sealing strips, and their uses are also different. I have compiled some relevant information about the types of door and window sealing strips for everyone here. Door and window sealing strips can be divided into major categories in use: glass sealing strips, door leaf and door cover sealing strips and wool strips. The glass sealing strip is used to seal the gap between the glass leaf and the frame. The door leaf sealing strip is used to seal the gap between the door panel and the door frame, and the wool strip is mainly used to seal the gap between the frame and the door. It is said that in the installation process of various doors and windows, the sealing strip is indispensable. At the same time, it is very simple in construction, without complicated procedures, and this is also a must-have for an EPDM sealing strip. Many people do not know enough about the product such as EPDM sealing strip, let alone the product. The characteristics and advantages. First of all, the weather resistance of the weather resistance product is very good. It can be used in severe cold and hot environments, dry and humid environments for a long time, and it can also have good corrosion resistance. The advantage is that the service life of the product can be prolonged. High-quality products will improve the overall style and performance of the door in terms of appearance, internal quality, or later use. Wrapped seals are a modern development trend. Where can wrap seals be used? Wooden windows, aluminum clad wood, aluminum alloy doors and windows, wooden doors, wood-plastic doors, ecological doors, log doors, solid wood doors, painted doors, oak doors, composite doors, suit doors, security doors, sliding doors, wardrobe doors, cabinet doors, Bronze doors, cast aluminum doors, plastic steel doors and windows, etc. Among the raw materials for sealing strips, EPDM, the main raw material used in the past, is also constantly updated and developed. The new EPDM with excellent physical properties and good processing properties can control the long-chain branching in the molecule and make it The vulcanization performance is better, and the extrusion speed and the output of the product can be improved. These materials have the excellent engineering properties of elastomers and the excellent characteristics of plastics, which are convenient for processing and can be recycled and reused. These materials are gradually replacing EPDM. Products. The sealing strip plays a role of sealing and waterproofing in plastic steel doors and windows, aluminum alloy doors and windows, and wooden doors and windows. Sealing strips have high requirements for materials. First of all, they must have strong stretchability and elasticity, as well as good temperature resistance and aging resistance. At the same time, in order to ensure the close contact between the sealing strip and the profile, the cross-sectional structure of the sealing strip must match the profile of the door and window, which is generally suitable for hanging windows and folding doors and windows. The wool strip is generally used to install on the sash of the push-type door and window to seal the gap between the frame and the sash. The specifications of the tops can greatly affect the watertight performance of doors and windows, as well as the opening and closing of doors and windows. If the size of the top is too large, or the vertical hair is too high, it will be very difficult to assemble, and after it is assembled, the resistance of doors and windows will increase when they move. If the fire size is too small, or the vertical hair is too low, brackets are prone to occur in doors and windows, which reduces the airtightness of doors and windows. There are generally two types of tops that have undergone silicification treatment and those that have not been silicified. Generally, the treatment effect will be better. Quality tops have the following characteristics: there are no obvious defects in appearance, the surface is straight, the bottom plate and vertical hair are relatively smooth, there is no bending phenomenon, and there are no pits and other problems on the bottom plate, and it meets the size requirements. Silicone strip and glass stick together. In fact, we cannot do without this product in many places in our lives, because its use effect is very good. Friends who don’t know can take a look at Sanyuan B with me. The characteristics of the C-sealing strip. Third, the ozone resistance of the ozone-resistant product is very good. It can be completely exposed to the air to work, so that the superiority of the product is more prominent. The resistance of the EPDM sealing strip is The effect of ultraviolet radiation is also very good, and it also has excellent physical and mechanical properties, so it is often used to make airplanes, trains, automobiles, and so on. The expensive one is fifteen to six thousand yuan per ton, and the cheap one is only 6,000 yuan per ton. The price difference is nearly 10,000 yuan, and the quality difference is very big, which is confusing. Many sealing strip manufacturers claim that their products are in accordance with GB12002-89 , And can issue a test report qualified by an authoritative organization, the classification of sealing strips 1, 2, according to the surface treatment status, some of the sealing strip surface can be divided into flocking type sealing strips after additional treatment; surface coating sealing strips; with fabric Adhesive sealing strip. The characteristics of automobile sealing strips In the -40℃ low temperature resistance test, the sealing strips do not become hard and brittle, and still maintain softness and good adhesion of the strips, showing excellent cold resistance. The automotive sealing strips are mainly composed of Ethylene propylene diene rubber (EPDM) rubber with good elasticity and resistance to compression deformation, aging resistance, ozone, chemical effects, and a wide temperature range (-40℃~+120℃) is formed by foaming and dense compounding of ethylene propylene diene monomer rubber (EPDM). Contains unique metal clamps and tongue buckles, which are durable and easy to install. The main function of doors and windows is to seal, how to strengthen the seal, then the sealing strip plays a very critical role. The common sealing strips on the market are generally made of pvc material. The quality of the sealing strips mainly depends on the pros and cons of the plasticizers added. With the increase in the price of various chemical fields, the price of the sealing strips is constantly increasing. rise.
Nowadays, it is very common for us to utilise in custom sealing strip. And the quality of is decisive to production efficiency.
To know more about rubber seal strip suppliers custom sealing strip, visit Kenna Rubber & Plastic for more reviews, tips and advice. Guangzhou Kenna Rubber & Plastic Co., Ltd. won't let you down for your options. visit!
Consistency and simplicity go hand in hand. That means aligning Kenna with the right platforms, speaking to the right customers with the right message, and selling the right idea.
For optimal custom sealing strip, choose a high-quality rubber seal strip suppliers system and make sure a certified installer sets it up.
Now that Guangzhou Kenna Rubber & Plastic Co., Ltd. has become a leader in the space and have been able to scale appropriately, we are ready to expand to other cities.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...