Kenna rubber seal strip suppliers & specialist,focus on EPDM, PVC, TPE, TPO, NR, CR, NBR, TPR, TPV, EVA, SIR, PP, PC, PMMA and other raw materials developed products.

Tel : +86 020-020-86213703  E-mail : liuwei@kennarubber.com

Silicone strip hot bonding equipment

by:Kenna     2021-05-29
Types and uses of door and window sealing strips for heat-bonding equipment with silicone strips Introduction: When we install doors and windows in our lives, there will always be a fixed gap, which causes the doors and windows to close tightly. The role of door and window sealing strips is used to eliminate these gaps. However, there are many types of door and window sealing strips, and their uses are also different. I have compiled some relevant information about the types of door and window sealing strips for everyone here. Door and window sealing strips can be divided into major categories in use: glass sealing strips, door leaf and door cover sealing strips and wool strips. The glass sealing strip is used to seal the gap between the glass leaf and the frame. The door leaf sealing strip is used to seal the gap between the door panel and the door frame, and the wool strip is mainly used to seal the gap between the frame and the door. It is said that in the installation process of various doors and windows, the sealing strip is indispensable. And it does not react with any paint or cleaning agent. Customers do not need to worry about the integrity and aesthetics of doors and windows being damaged. According to the compound structure of the rubber compound, they can be divided into pure rubber sealing strips-composed of a single type of rubber; two composite sealing strips ——Composed of dense rubber and foam sponge rubber, often containing a metal skeleton material in the axial direction inside the dense rubber; three-composite sealing strip——composed of two types of dense rubber (one of which is light-colored) and sponge rubber, usually The dense rubber contains a metal skeleton and reinforcing fibers. Automobile sound insulation and anti-collision strips are divided into 3M back-adhesive small D-shaped sealing strip, 3M back-adhesive large D-shaped sealing strip, 3M back-adhesive large P-shaped sealing strip, A, microwave continuous vulcanization composite sealing strip: microwave vulcanization technology is the 70s of the 20th century The production technology used and widely promoted after the foreign energy crisis in the 1940s, the use of microwave continuous vulcanization technology can not only produce composite strips of metal core, solid core rubber and sponge rubber, but also save energy and improve work efficiency. Other continuous vulcanization methods are superior. Silicone sealing strips can also be glued to materials with a smooth surface because of its high shock resistance and waterproof performance. According to the composite structure of rubber materials, automotive sealing strips can be divided into pure rubber sealing strips-composed of a single type of rubber; 2. Composite sealing strip-composed of dense rubber and foam sponge rubber, and often contains a metal skeleton material in the axial direction inside the dense rubber; three composite sealing strip-composed of two types of dense rubber (one of which is light-colored) and sponge rubber The composition usually contains a metal skeleton and reinforcing fibers inside the compact glue. The sealing strip plays a role of sealing and waterproofing in plastic steel doors and windows, aluminum alloy doors and windows, and wooden doors and windows. Sealing strips have high requirements for materials. First of all, they must have strong stretchability and elasticity, as well as good temperature resistance and aging resistance. At the same time, in order to ensure the close contact between the sealing strip and the profile, the cross-sectional structure of the sealing strip must match the profile of the door and window, which is generally suitable for hanging windows and folding doors and windows. The wool strip is generally used to install on the sash of the push-type door and window to seal the gap between the frame and the sash. The specifications of the tops can greatly affect the watertight performance of doors and windows, as well as the opening and closing of doors and windows. If the size of the top is too large, or the vertical hair is too high, it will be very difficult to assemble, and after it is assembled, the resistance of doors and windows will increase when they move. If the fire size is too small, or the vertical hair is too low, brackets are prone to occur in doors and windows, which reduces the airtightness of doors and windows. There are generally two types of tops that have undergone silicification treatment and those that have not been silicified. Generally, the treatment effect will be better. Quality tops have the following characteristics: there are no obvious defects in appearance, the surface is straight, the bottom plate and vertical hair are relatively smooth, there is no bending phenomenon, and there are no pits and other problems on the bottom plate, and it meets the size requirements. Silicone strip hot bonding equipment The above is an introduction to the characteristics and uses of rubber sealing strips. It can be seen that the characteristics of the product are not only very many, but also more widely used. This is also the main reason for everyone's recognition. Features: EPDM has excellent weather resistance, weather resistance refers to long-term resistance to severe cold, heat, dryness, and humidity, and excellent corrosion resistance to rain and snow erosion, which can completely extend the service life of the rubber strip; Heat aging resistance refers to strong resistance to hot air aging. Wooden door, door and window sealing strip product features: self-adhesive wooden door sealing strip is made of EPDM rubber foam, which creates its excellent characteristics, door and window sealing strip characteristics, plastic steel door and window sealing strips are widely used in recent years, a new generation Doors and windows have better corrosion resistance, weather resistance, noise reduction and heat insulation than ordinary door and window sealing strips. The rubber materials of the sealing strips are more resistant to aging, low temperature, moisture, and chemical corrosion, especially ozone aging. Ethylene propylene diene rubber (EPDM). The surface of the plastic steel door and window sealing strip is smooth and clean, which not only has excellent sealing and waterproof performance, but also plays a beautiful decorative role. In terms of material selection, manufacturers with higher requirements generally choose EPDM rubber or thermoplastic EPDM rubber, according to the location And use classification (1) window glass sealing strip; (2) door sealing strip; (3) decorative strip, molding strip; (4) other sealing strips (trunk lid sealing strip, engine cover sealing strip, water tank sealing strip, Emergency door sealing strip, etc.).
Guangzhou Kenna Rubber & Plastic Co., Ltd. is famous for creating innovative products like the rubber seal strip suppliers and supporting their market leadership with savvy marketing campaigns to build an elite brand.
To be the safest, most progressive domestic rubber seal strip suppliers, relentless in the pursuit of customer and employee excellence.
In the boundless Chinese market, there are a number of enterprises that provides custom sealing strip rubber seal strip suppliers of their own brand over the years, but few have won more support from customers on the international stage than Kenna.
In conjunction with retraining and upskilling efforts, Guangzhou Kenna Rubber & Plastic Co., Ltd.’s workers should focus on growing unique human skills that high-tech machines are unable to replicate, such as strategic and abstract thinking, complex communications, creativity and leadership competencies.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...