Kenna rubber seal strip suppliers & specialist,focus on EPDM, PVC, TPE, TPO, NR, CR, NBR, TPR, TPV, EVA, SIR, PP, PC, PMMA and other raw materials developed products.

Tel : +86 020-020-86213703  E-mail : liuwei@kennarubber.com

Silicone waterproof strip

by:Kenna     2021-05-01
Silicone waterproof strip, and this EPDM sealing strip is often more advanced in design. It has an independent bubble structure, so that it can form a good sealing and bonding rate, and all the bubbles are also more advanced. They have reached a uniform distribution and can achieve good expansion and contraction performance. It is precisely because of this that it can achieve superior performance such as no flow, no deformation, no cracking during use, and it is on the contact material used. Except for the flat surface, it cannot be combined with many uneven materials. Types and uses of door and window sealing strips Introduction: When we install doors and windows in our lives, there will always be certain gaps, which will cause the doors and windows to close tightly. The role of door and window sealing strips is used to eliminate these gaps. However, there are many types of door and window sealing strips, and their uses are also different. I have compiled some relevant information about the types of door and window sealing strips for everyone here. Door and window sealing strips can be divided into major categories in use: glass sealing strips, door leaf and door cover sealing strips and wool strips. The glass sealing strip is used to seal the gap between the glass leaf and the frame. The door leaf sealing strip is used to seal the gap between the door panel and the door frame, and the wool strip is mainly used to seal the gap between the frame and the door. It is said that in the installation process of various doors and windows, the sealing strip is indispensable. The sealing strip plays a role of sealing and waterproofing in plastic steel doors and windows, aluminum alloy doors and windows, and wooden doors and windows. Sealing strips have high requirements for materials. First of all, they must have strong stretchability and elasticity, as well as good temperature resistance and aging resistance. At the same time, in order to ensure the close contact between the sealing strip and the profile, the cross-sectional structure of the sealing strip must match the profile of the door and window, which is generally suitable for hanging windows and folding doors and windows. Automobile sealing strips can be classified into solid core products (round, square, flat cross-section shapes), hollow products, and metal rubber composite products according to the cross-sectional shape. Second, heat-aging EPDM sealing strips are in production Many experiments have been carried out before. It can be seen from the experiment that the product can continue to work in a high temperature environment without aging. Therefore, many companies use the product to improve work efficiency to obtain More profit. Under normal circumstances, EPDM sealing strips can be used stably for more than ten years. With the continuous development and maturity of thermoplastic elastomer (TPE) technology, the application areas continue to expand. According to the classification of vulcanization (1) Discontinuous vulcanization (the extruded rubber strip is After a certain length is cut, put it in a vulcanizing tank, and put the extruded semi-finished rubber strip into the model to vulcanize); (2) Continuous vulcanization method (microwave continuous vulcanization method, salt bath continuous vulcanization method, hot air continuous vulcanization method, etc.) Several methods). The wool strip is generally used to install on the sash of the push-type door and window to seal the gap between the frame and the sash. The specifications of the tops can greatly affect the watertight performance of doors and windows, as well as the opening and closing of doors and windows. If the size of the top is too large, or the vertical hair is too high, it will be very difficult to assemble, and after it is assembled, the resistance of doors and windows will increase when they move. If the fire size is too small, or the vertical hair is too low, brackets are prone to occur in doors and windows, which reduces the airtightness of doors and windows. There are generally two types of tops that have undergone silicification treatment and those that have not been silicified. Generally, the treatment effect will be better. Quality tops have the following characteristics: there are no obvious defects in appearance, the surface is straight, the bottom plate and vertical hair are relatively smooth, there is no bending phenomenon, and there are no pits and other problems on the bottom plate, and it meets the size requirements. The 'specialized' covered sealing strip originated from Germany and has been popular in the European market for a long time. It is famous for its environmentally friendly sealing performance. PVC sealing strip vendors have made great efforts in using fillers. Some manufacturers are pursuing greater output. , (Saving a little electricity) Use talc, heavy calcium and the like as fillers, which greatly increases the specific gravity of the sealing strip products (our users generally buy by kilograms and use them by length). The cost has been severely reduced and the quality has to be tried. Because PVC products contain halogens and heavy metals in stabilizers, they are not conducive to environmental protection. Therefore, developed foreign countries and domestic Beijing and coastal cities have eliminated or restricted the use of PVC strips, low temperature elasticity, and the temperature when the tensile capacity reaches 100MPa is -58 , EPDM rubber is a copolymer of ethylene, propylene and a small amount of third monomer non-conjugated diene, the international name: EthyienePropyeneDieneMethyiene is referred to as EPDM. It is suitable for all kinds of doors, windows, etc. 2. Cabinet sealing strips have developed their own characteristics based on the use of electrical cabinets and based on 20 years of experience in the research and development of sealing strips, which have good sealing performance. , Waterproof, fireproof, insect-proof, windproof, light-proof, anti-collision and long service life, etc. 1. Three-composite steel framework, not easy to deform and shrink, firm assembly, good sealing
However, with the increased prevalence of rubber seal strip suppliers, it has become far more affordable.
Are you looking for more information regarding rubber seal strip suppliers custom sealing strip? Visit Kenna Rubber & Plastic and contact us as soon as possible!
With so many suggestions and tips on diferent solutions to custom sealing strip issues, it is truly important to know how to find the most appropriate rubber seal strip suppliers at economical price.
But we do think that reckoning with supply chains of rubber seal strip suppliers is a really important step. Even super simple switches in material, or sourcing, or shipping, or worker benefits seems like good place to start.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...