Kenna rubber seal strip suppliers & specialist,focus on EPDM, PVC, TPE, TPO, NR, CR, NBR, TPR, TPV, EVA, SIR, PP, PC, PMMA and other raw materials developed products.

Tel : +86 020-020-86213703  E-mail : liuwei@kennarubber.com

The solution to the window rubber sealing strip falling off

by:Kenna     2021-04-23
The glass is not installed in the center, the gap between the glass and the window frame is uneven, and the rubber sealing strip is not close to the glass and the window frame, and the installation is uneven. Knock the glass with your hand, there is a loose sound. The reasons for this situation are generally as follows:    1. The sundries in the notch were not removed in time when the glass was installed, so that the glass and the notch were not aligned.   2. The gap between the glass and the glass notch is uneven, and the rubber strip is in poor contact with the glass and the glass groove, protruding from the glass notch, and the sealing strip can be easily pulled off by hand.   3. The rubber strip is not broken at the corners, and glue is not glued. The corrective measures provided by the sealing strip manufacturer are:    1. Before installing the glass, carefully remove the debris in the notch, such as mortar, brick shavings, wood blocks, etc., carefully align the glass when placing it, and ensure that the gap on both sides is uniform and timely Correction and fixation to prevent collision and displacement, deviating from the center of the notch.   2. The rubber sealing strip can not be pulled too tightly, and the blanking length is 2O-3Omm longer than the assembly length. The mounting should be in place when installing, the surface should be straight, and it should be in close contact with the glass and the glass notch, so that the force around the glass is even. At the corners, the rubber strips should be cut off at an inclined plane, and glue should be injected at the break to be firmly bonded.  3. When using sealant to caulk and fix glass, first squeeze the glass with a rubber strip or block to leave a gap for the glue. The depth of the glue should not be less than 5mm. Before the glue is cured, the glass should be kept free from vibration.
Building a brand as Kenna from the very start is simple so long as you keep 'the three C's' in mind: clarity, consistency and constancy.
Hard work and performance is rewarded through bonuses and commissions. Job satisfaction is very important for employees and owners, Guangzhou Kenna Rubber & Plastic Co., Ltd. will create a work environment that is enjoyable and profitable for all.
Equipping rubber seal strip suppliers with innovative technology and updated processes will simplify daily compliance duties so that they can focus on attracting, retaining, and developing the most engaged workforce possible.
The above are only part of the examples regarding rubber seal strip suppliers, for more information, please click here Kenna Rubber & Plastic.
To derive the optimal value out of custom sealing strip rubber seal strip suppliers for your home, make sure they're purchased from a globally certified organization to ensure quality in use. Such an offer can be found at Kenna Rubber & Plastic.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...